Site Search


Tree Care LogoISA Logo

Tree Care Industry Assoc.
www.natlarb.com

International Society of Arboriculture
www.isa-arbor.com

Special Products

We can also with...

  • Hard to find tools like axaroons
  • Special orders like 4-5-6 holed hubs for multi-stemmed trees
  • Bracing needs - 1" walled joining rings for bracing rods - let us know if you can't find something or need a part fabricated
  • Large and extra long drills and augers - we represent two manufactures that will have or can make whatever you may need.

Product Description Part No. Price

KNIPEX 8" Cutters (click image for larger photo)

 

KN8

$72.00 + S&H

     Style 4: recess in the blade allows easier cutting of thicker wires. 20-degree angled head with single-sided joint bar & diagonal cutting edge for flush cutting.

     Cuts material like bolts, nails, rives, up to 52mm dia.

     Exceptional cutting performance with minimum effort because of new lever action design.

     Cutting edges additionally induction hardened, cutting edge hardness approx. 64 hrc.

Click here to contact us about purchasing this item.

Product Description Part No. Price

"CUT" Hub

501C

$25.00 + S&H

Basically the same part as the Rigguy 501 HUB except it is made out of 6061 AL round stock then machined with flats for each Wire Stop.(Needs three Wire Stops)

Click here to contact us about purchasing this item.

Product Description Part No. Price

Bracing Hub

BH4.5

$75.00

This heavy-duty hub (2.00 wide - walls a full 5/8 thick - OD is 4.5 painted steel) is for joining thread rods in between 2-3-4 trunks to be supported by rods. We make these as ordered so let us know the number and size of holes needed. We all want to drill strait/level holes when bracing but these hubs give you a little margin of error.

Click here to contact us about purchasing this item.

 

Product Description Part No. Price

Beveled Washer

BW35

$8.00

We make these washers for cabling situations where there is a significant limb angle. The beveled washer (6061 AL) gives the Wire Stop a flat 1.25 surface to be seated on. This can also be accomplished by chiseling out a small amount of wood to form a flat surface for the Wire Stop.

Click here to contact us about purchasing this item.

Product Description Part No. Price

4 Way Hub

504

$45.00

Stainless steel hub for connection four leads/trunks together. For use with 3/8,5/16,1/4, and 3/16 EHS strand. We also can fabricate specialized hubs for 5 or 6 leads/trunks just let us know what you need. PN - 504 $45.00

Click here to contact us about purchasing this item.